Constructed of heavy-duty 1″ black polypropylene webbing and convenient quick-release buckles. Unlike bungee cords, these durable tie-downs don’t stretch, so they won’t tear your cover or damage your boat. Designed in an extra long length to accommodate boats with hard tops or t-tops. Each kit contains twelve 12-foot long straps.
Order No. 61000DEHT.
Specifically designed to protect pontoon consoles! Solves the problem of ill-fitting standard covers due to the proximity of the console to the side rails. Snap-on cover with 3/8″ screw studs installs easily for a customized fit and stays securely in place. Provides protection for the console, electronic equipment and controls. Available in 3 different boat cover fabrics to match your boat, bimini top or existing boat cover. Available in Sunbrella®, Performance Poly-Guard® & Sun-DURA®.
|Fits up to:||Poly-Guard® Order No.||Sun-DURA® Order No.||Sunbrella® Order No.|
|36″H x 32″W x 23″D||61062P||61062S||61062A|
|36″H x 32″W x 33″D||61063P||61063S||61063A|
|36″H x 40″W x 33″D||61064P||61064S||61064A|
For storage and mooring only. Not recommended for trailering.
Constructed of heavy-duty 1″ black polypropylene webbing and convenient quick-release buckles. Unlike bungee cords, these durable tie-downs don’t stretch, so they won’t tear your cover or damage your boat. Each kit contains twelve 8-foot straps.
Order No. 61000.
A must-have accessory to secure your cover on your boat while in the water. Each sand-bag is constructed of 7oz. black Sun-DURA material with hook & loop closure and sewn-in adjuster strap with quick release buckle. Sand not included. Maximum weight 8lbs. Kit includes 4 sand bags.
Order No. 61010.
Giant 3-1/4″ suction cups with toggle ball ties stick to auto finishes, smooth flat boat finishes and windows. Great for mooring! 6″ ties stretch to 11″. 4 per pack.
Order No. 61003
Combines added breathabililty for the health of your boat AND secures the cover to your boat while in the water. Adjustable (22″-70″) vented support poles reduce moisture, heat and mildew under the cover and provides excellent support underneath the cover to prevent water from pooling. Sand-bag mooring kit is a must-have accessory to secure your cover on your boat while in the water. Each sand-bag is constructed of 7oz. black Sun-DURA material with hook & loop closure and sewn-in adjuster strap with quick release buckle. Sand not included. Maximum weight 8lbs. per bag. Includes (3) Vented Support Poles, Part #60002 AND (2) Sand Bag Kits (4 bags per kit), Part #61010
Order No. 61015.
Replace a conventional support pole with one that provides an air vent to reduce moisture, heat and mildew under the cover. Includes an adjustable (22″ to 70″) anodized aluminum pole, boat vent and simple installation instructions.
Order No. 60002.
Protect your investment with this fast and easy-to-install Boat Vent II. The Boat Vent II can be added to any custom or styled-to-fit boat cover. Made with UV inhibited polymers to withstand the elements. Prolongs the life of the boat’s upholstery by venting the enclosed space of the warm, moist air. Boat Vent II helps prevents mold, mildew, and bacteria from growing under the boat cover and causing irreversible damage to the boat’s interior. Can be used alone or with most standard ¾” support poles.
Order No. VENTII.
Eliminates virtually all possible areas that could collect water and allow it to pool, causing damage to the cover. This system is designed for simplicity with two pre-installed, adjustable 20-foot straps that snap quickly to the rear tow hooks and one 40-foot adjustable strap to cradle the bow. System fits up to 28-foot boats. For pontoon boats, two systems are required and can easily be joined to create a perfect “frame” for the pontoon cover. Each system comes with one adjustable (40″ to 70″) support pole, system center, strap set and simple installation instructions.
Order No. 60008.
Prevent dry rot and mildew. Available in two styles. Each style is constructed of anodized aluminum tubing that can be adjusted to desired height from 22″ to 70″. Packaged 1 per box.
|22″-70″ Support Pole with Snap and Vinyl End||60000|
|Support Pole with Tip End||60004|
The rope ratchet allows you to tighten your cover to proper tension then releases with a convenient thumb lever. Accommodates 1/4″ rope which is standard of all Carver Custom Covers and many Specialty Boat Covers.
Order No. 61020.
Boat skirts protect the hull from UV damage and keep gel coat and decals looking new. Helps protect from scratches and oxidation. Easy to install with 1-1/2″ to 2″ OD pipe insulation (not included). Simply insert into skirt pockets and tuck under hem of cover above the rub rail for a secure fit. Boat Skirts are available in lengths from 18′ to 30′ and provide an additional 30″ of side coverage for your boat. Sold in pairs for port and starboard side protection.
To measure for a boat skirt, start at the tip of the bow of the boat and follow the curvature of the boat at the rub rail to the stern of the boat.
For storage only. Not recommended for trailering or mooring.